Click Image for Gallery
Inquiry or Customize your Products
You will receive our feedback within 12 hours,unless the email you offered is incorrect.
Filtering Reactor, 338A ,0.2mH, for Regenerative drive,wind power, photovoltaic ,VFD and UPS
Description of filter reactor :
Filter reactor together with capacitors can combine harmonic circuit to reduce the harmonic current in the system , mainly 3rd , 5th , 7th , 11th , 13th and higher . Filter reactor can be installed by parallel or serial connection .Function of filter reactor :
PWM Rectifier LCL reactor , carrier frequency: ≥2K working Frequency: 50HZ Phase: 3Harmonic contains the VFD’s interference for the power grid , harmonics mainly 3、5、7、9、11、13、15、17、19 , output side harmonics mostly 5~10Khz high frequency harmonics .
Technical parameter of filter reactor :
Rated current:≤5000A ; Rated voltage:<1000V;dielectric strength : winding-ground 3000VAC/50HZ/60S free of damageInsulation resistor : winding-ground , cross core screw-ground 500VDC , insulation resistance≥100MΩ ; reactor noise:<65db (1 meter from reactor)
Protection:IP00; Insulation:F/H , Standard:IEC289;GB10229-88 (eqv IEC289:1987)
Working Environment Requirements of filter reactor :
Altitude less than 1000 meters , above 1000meters working under clocking ; Ambient temperature -25℃~+40℃; Relative humidity : ≤ 90%No toxic gas , no flammable and explosive item , no electroconductive dust
Application of filter reactor :
Wind power generation, photovoltaic ,VFD and UPSChoke | |
Inductance Value(mH) | 0.2 |
Insulation Class | H |
Nominal voltage range(V) | 400 |
Phase | 3 Phase |
Nominal Current range(A) | 338 |
Certificates : http://sikes-elec.com/Certificates.html
This is a Demo Shop. You can place your order, but please contact us before you pay.